|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SKP10N60A, SKB10N60A SKW10N60A Fast IGBT in NPT-technology with soft, fast recovery anti-parallel EmCon diode * 75% lower Eoff compared to previous generation combined with low conduction losses * Short circuit withstand time - 10 s * Designed for: - Motor controls - Inverter * NPT-Technology for 600V applications offers: - very tight parameter distribution - high ruggedness, temperature stable behaviour - parallel switching capability * Very soft, fast recovery anti-parallel EmCon diode C G E P-TO-220-3-1 (TO-220AB) P-TO-263-3-2 (D-PAK) P-TO-247-3-1 (TO-263AB) (TO-247AC) * Complete product spectrum and PSpice Models : http://www.infineon.com/igbt/ Type SKP10N60A SKB10N60A SKW10N60A Maximum Ratings Parameter Symbol Value SKP10N60A SKB10N60A SKW10N60A VCE 600V IC 10A VCE(sat) 2.3V Tj 150C Package TO-220AB TO-263AB TO-247AC Ordering Code Q67040-S4458 Q67040-S4459 Q67040-S4506 Unit Collector-emitter voltage DC collector current TC = 25C TC = 100C Pulsed collector current, tp limited by Tjmax Turn off safe operating area VCE 600V, Tj 150C Diode forward current TC = 25C TC = 100C Diode pulsed current, tp limited by Tjmax Gate-emitter voltage Short circuit withstand time Power dissipation TC = 25C Operating junction and storage temperature 1) VCE IC 600 20 10.6 V A ICpul s IF 40 40 21 10 IFpul s VGE tSC Ptot Tj , Tstg 42 20 10 92 -55...+150 V s W C VGE = 15V, VCC 600V, Tj 150C 1) Allowed number of short circuits: <1000; time between short circuits: >1s. 1 Sep-02 SKP10N60A, SKB10N60A SKW10N60A Thermal Resistance Parameter Symbol Conditions Max. Value SKP10N60A SKB10N60A SKW10n60A Unit Characteristic IGBT thermal resistance, junction - case Diode thermal resistance, junction - case Thermal resistance, junction - ambient SMD version, device on PCB 1) RthJC RthJCD RthJA RthJA TO-220AB TO-247AC TO-263AB 1.35 2.4 62 40 40 K/W Electrical Characteristic, at Tj = 25 C, unless otherwise specified Parameter Static Characteristic Collector-emitter breakdown voltage Collector-emitter saturation voltage V ( B R ) C E S V G E = 0V , I C = 5 00 A VCE(sat) V G E = 15 V , I C = 10 A T j =2 5 C T j =1 5 0 C Diode forward voltage VF V G E = 0V , I F = 1 0 A T j =2 5 C T j =1 5 0 C Gate-emitter threshold voltage Zero gate voltage collector current VGE(th) ICES I C = 30 0 A , V C E = V G E V C E = 60 0 V, V G E = 0 V T j =2 5 C T j =1 5 0 C Gate-emitter leakage current Transconductance Dynamic Characteristic Input capacitance Output capacitance Reverse transfer capacitance Gate charge Internal emitter inductance measured 5mm (0.197 in.) from case Short circuit collector current 2) Symbol Conditions Value min. 600 1.7 1.2 3 Typ. 2 2.3 1.4 1.25 4 6.7 550 62 42 52 7 13 100 max. 2.4 2.8 1.8 1.65 5 Unit V A 40 1500 100 660 75 51 68 A nC nH nA S pF IGES gfs Ciss Coss Crss QGate LE IC(SC) V C E = 0V , V G E =2 0 V V C E = 20 V , I C = 10 A V C E = 25 V , V G E = 0V , f= 1 MH z V C C = 48 0 V, I C =1 0 A V G E = 15 V T O - 22 0A B T O - 24 7A C V G E = 15 V ,t S C 10 s V C C 6 0 0 V, T j 15 0 C 1) Device on 50mm*50mm*1.5mm epoxy PCB FR4 with 6cm2 (one layer, 70m thick) copper area for collector connection. PCB is vertical without blown air. 2) Allowed number of short circuits: <1000; time between short circuits: >1s. 2 Sep-02 SKP10N60A, SKB10N60A SKW10N60A Switching Characteristic, Inductive Load, at Tj=25 C Parameter IGBT Characteristic Turn-on delay time Rise time Turn-off delay time Fall time Turn-on energy Turn-off energy Total switching energy Anti-Parallel Diode Characteristic Diode reverse recovery time trr tS tF Diode reverse recovery charge Diode peak reverse recovery current Diode peak rate of fall of reverse recovery current during t b Qrr Irrm d i r r /d t T j =2 5 C , V R = 2 00 V , I F = 1 0 A, d i F / d t =2 0 0 A/ s 220 20 200 310 4.5 180 nC A A/s ns td(on) tr td(off) tf Eon Eoff Ets T j =2 5 C , V C C = 40 0 V, I C = 1 0 A, V G E = 0/ 15 V , R G = 25 , 1) L =1 8 0n H, 1) C = 5 5p F Energy losses include "tail" and diode reverse recovery. 28 12 178 24 0.15 0.17 0.320 34 15 214 29 0.173 0.221 0.394 mJ ns Symbol Conditions Value min. typ. max. Unit Switching Characteristic, Inductive Load, at Tj=150 C Parameter IGBT Characteristic Turn-on delay time Rise time Turn-off delay time Fall time Turn-on energy Turn-off energy Total switching energy Anti-Parallel Diode Characteristic Diode reverse recovery time trr tS tF Diode reverse recovery charge Diode peak reverse recovery current Diode peak rate of fall of reverse recovery current during t b Qrr Irrm d i r r /d t T j =1 5 0 C V R = 2 00 V , I F = 1 0 A, d i F / d t =2 0 0 A/ s 350 36 314 690 6.3 200 nC A A/s ns td(on) tr td(off) tf Eon Eoff Ets T j =1 5 0 C V C C = 40 0 V, I C = 1 0 A, V G E = 0/ 15 V , R G = 25 1) L =1 8 0n H, 1) C = 5 5p F Energy losses include "tail" and diode reverse recovery. 28 12 198 26 0.260 0.280 0.540 34 15 238 32 0.299 0.364 0.663 mJ ns Symbol Conditions Value min. typ. max. Unit 1) Leakage inductance L an d Stray capacity C due to dynamic test circuit in Figure E. 3 Sep-02 SKP10N60A, SKB10N60A SKW10N60A 50A T C =80c IC, COLLECTOR CURRENT IC, COLLECTOR CURRENT Ic t p = 5 s 40A 30A 20A 10A T C =110c Ic 10A 1 5 s 5 0 s 1A 2 0 0 s 1m s DC 0 ,1 A 0A 10H z 100H z 1kH z 10kH z 100kH z 1V 10V 100V 1000V f, SWITCHING FREQUENCY Figure 1. Collector current as a function of switching frequency (Tj 150C, D = 0.5, VCE = 400V, VGE = 0/+15V, RG = 25) VCE, COLLECTOR-EMITTER VOLTAGE Figure 2. Safe operating area (D = 0, TC = 25C, Tj 150C) 120W 25A 100W 20A Ptot, POWER DISSIPATION 80W IC, COLLECTOR CURRENT 15A 60W 10A 40W 20W 5A 0W 25C 50C 75C 100C 1 25C 0A 25C 50C 75C 1 0 0 C 1 2 5 C TC, CASE TEMPERATURE Figure 3. Power dissipation as a function of case temperature (Tj 150C) TC, CASE TEMPERATURE Figure 4. Collector current as a function of case temperature (VGE 15V, Tj 150C) 4 Sep-02 SKP10N60A, SKB10N60A SKW10N60A 35A 30A 35A 30A IC, COLLECTOR CURRENT 25A V G E= 2 0 V 20A 15A 10A 5A 0A 0V 15V 13V 11V 9V 7V 5V IC, COLLECTOR CURRENT 25A V G E= 2 0 V 20A 15A 10A 5A 0A 0V 15V 13V 11V 9V 7V 5V 1V 2V 3V 4V 5V 1V 2V 3V 4V 5V VCE, COLLECTOR-EMITTER VOLTAGE Figure 5. Typical output characteristics (Tj = 25C) VCE, COLLECTOR-EMITTER VOLTAGE Figure 6. Typical output characteristics (Tj = 150C) VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE 35A 30A 3 ,5 V IC = 2 0 A 3 ,0 V T j=+25C +150C IC, COLLECTOR CURRENT 25A 20A 15A 10A 5A 0A 0V 2 ,5 V IC = 1 0 A 2 ,0 V IC = 5 A 2V 4V 6V 8V 10V 1 ,5 V 0 C 5 0 C 1 0 0 C 1 5 0 C VGE, GATE-EMITTER VOLTAGE Figure 7. Typical transfer characteristics (VCE = 10V) Tj, JUNCTION TEMPERATURE Figure 8. Typical collector-emitter saturation voltage as a function of junction temperature (VGE = 15V) 5 Sep-02 SKP10N60A, SKB10N60A SKW10N60A t d (o ff) t, SWITCHING TIMES 100ns t, SWITCHING TIMES 100ns t d (o ff) tf t d (o n ) tr 10ns 0A tf t d (o n ) tr 20 40 60 80 5A 10A 15A 20A 25A 10ns 0 IC, COLLECTOR CURRENT Figure 9. Typical switching times as a function of collector current (inductive load, Tj = 150C, VCE = 400V, VGE = 0/+15V, RG = 25, Dynamic test circuit in Figure E) RG, GATE RESISTOR Figure 10. Typical switching times as a function of gate resistor (inductive load, Tj = 150C, VCE = 400V, VGE = 0/+15V, IC = 10A, Dynamic test circuit in Figure E) 5 ,5V VGE(th), GATE-EMITTER THRESHOLD VOLTAGE 5 ,0V 4 ,5V 4 ,0V 3 ,5V 3 ,0V 2 ,5V 2 ,0V 1 ,5V 1 ,0V -50 C 0 C 5 0C 100 C 150 C m in. ty p. m a x. t d (off) t, SWITCHING TIMES 100ns t d(on ) tf tr 50C 100C 150C 10ns 0C Tj, JUNCTION TEMPERATURE Figure 11. Typical switching times as a function of junction temperature (inductive load, VCE = 400V, VGE = 0/+15V, IC = 10A, RG = 2 5, Dynamic test circuit in Figure E) Tj, JUNCTION TEMPERATURE Figure 12. Gate-emitter threshold voltage as a function of junction temperature (IC = 0.3mA) 6 Sep-02 SKP10N60A, SKB10N60A SKW10N60A 1,6m J 1,4m J *) Eon and Ets include losses due to diode recovery. 1 ,0m J *) Eon and Ets include losses due to diode recovery. E ts * E, SWITCHING ENERGY LOSSES 1,2m J 1,0m J 0,8m J E, SWITCHING ENERGY LOSSES E ts * 0 ,8m J 0 ,6m J E on * 0,6m J E off 0,4m J 0,2m J 0,0m J 0A E off 0 ,4m J E on * 5A 10A 1 5A 20A 2 5A 0 ,2m J 0 20 40 6 0 80 IC, COLLECTOR CURRENT Figure 13. Typical switching energy losses as a function of collector current (inductive load, Tj = 150C, VCE = 400V, VGE = 0/+15V, RG = 25, Dynamic test circuit in Figure E) RG, GATE RESISTOR Figure 14. Typical switching energy losses as a function of gate resistor (inductive load, Tj = 150C, VCE = 400V, VGE = 0/+15V, IC = 10A, Dynamic test circuit in Figure E) 0,8mJ *) Eon and Ets include losses due to diode recovery. 10 K/W 0 ZthJC, TRANSIENT THERMAL IMPEDANCE D=0.5 0.2 10 K/W -1 E, SWITCHING ENERGY LOSSES 0,6mJ 0.1 0.05 0.02 0,4mJ Ets* 0,2mJ R,(K/W) 0.4287 0.4830 0.4383 R1 , (s) 0.0358 4.3*10-3 3.46*10-4 R2 -2 10 K/W 0.01 Eoff Eon* C 1 = 1 / R 1 C 2 = 2 /R 2 single pulse 10 K/W 1s -3 0,0mJ 0C 50C 100C 150C 10s 100s 1m s 10m s 100m s 1s Tj, JUNCTION TEMPERATURE Figure 15. Typical switching energy losses as a function of junction temperature (inductive load, VCE = 400V, VGE = 0/+15V, IC = 10A, RG = 2 5, Dynamic test circuit in Figure E) tp, PULSE WIDTH Figure 16. IGBT transient thermal impedance as a function of pulse width (D = tp / T) 7 Sep-02 SKP10N60A, SKB10N60A SKW10N60A 25V 1nF C iss 20V VGE, GATE-EMITTER VOLTAGE 15V 120V 480V C, CAPACITANCE 100pF C o ss C rss 10V 5V 0V 0nC 25nC 50nC 75nC 10pF 0V 10V 20V 30V QGE, GATE CHARGE Figure 17. Typical gate charge (IC = 10A) VCE, COLLECTOR-EMITTER VOLTAGE Figure 18. Typical capacitance as a function of collector-emitter voltage (VGE = 0V, f = 1MHz) 25 s 200A 20 s IC(sc), SHORT CIRCUIT COLLECTOR CURRENT tsc, SHORT CIRCUIT WITHSTAND TIME 150A 15 s 100A 10 s 50A 5 s 0 s 10V 11V 12V 13V 14V 15V 0A 10V 12V 14V 16V 18V 20V VGE, GATE-EMITTER VOLTAGE Figure 19. Short circuit withstand time as a function of gate-emitter voltage (VCE = 600V, start at Tj = 25C) VGE, GATE-EMITTER VOLTAGE Figure 20. Typical short circuit collector current as a function of gate-emitter voltage (VCE 600V, Tj = 150C) 8 Sep-02 SKP10N60A, SKB10N60A SKW10N60A 500ns 1400nC 1200nC Qrr, REVERSE RECOVERY CHARGE 400ns trr, REVERSE RECOVERY TIME I F = 2 0A 1000nC 300ns I F = 20A 800nC IF = 1 0 A 200ns 600nC I F = 10A I F = 5A IF = 5 A 400nC 100ns 200nC 0ns 100A /s 300A /s 500A/s 700A /s 900A /s 0nC 100A /s 300A/s 500A/s 700A/s 900A/s d i F / d t, DIODE CURRENT SLOPE Figure 21. Typical reverse recovery time as a function of diode current slope (VR = 200V, Tj = 125C, Dynamic test circuit in Figure E) d i F / d t, DIODE CURRENT SLOPE Figure 22. Typical reverse recovery charge as a function of diode current slope (VR = 200V, Tj = 125C, Dynamic test circuit in Figure E) 20A 100 0A /s 12A IF = 2 0 A IF = 1 0 A IF = 5 A OF REVERSE RECOVERY CURRENT Irr, REVERSE RECOVERY CURRENT 16A d i r r /d t, DIODE PEAK RATE OF FALL 80 0A /s 60 0A /s 8A 40 0A /s 4A 20 0A /s 0A 1 0 0 A /s 3 0 0 A /s 5 0 0 A /s 7 0 0 A /s 9 0 0 A /s 0A /s 10 0A /s 300A /s 500 A /s 70 0A /s 9 00A /s d i F / d t, DIODE CURRENT SLOPE Figure 23. Typical reverse recovery current as a function of diode current slope (VR = 200V, Tj = 125C, Dynamic test circuit in Figure E) diF/dt, DIODE CURRENT SLOPE Figure 24. Typical diode peak rate of fall of reverse recovery current as a function of diode current slope (VR = 200V, Tj = 125C, Dynamic test circuit in Figure E) 9 Sep-02 SKP10N60A, SKB10N60A SKW10N60A 20A 2.0V I F = 20A 15A 150C 10A 100C VF, FORWARD VOLTAGE IF, FORWARD CURRENT 1.5V IF = F hl ! 5A 25C -55C 0A 0.0V 1.0V 0.5V 1.0V 1.5V 2.0V -40C 0C 40C 80C 120C VF, FORWARD VOLTAGE Figure 25. Typical diode forward current as a function of forward voltage Tj, JUNCTION TEMPERATURE Figure 26. Typical diode forward voltage as a function of junction temperature ZthJCD, TRANSIENT THERMAL IMPEDANCE D=0.5 10 K/W 0.2 0.1 0.05 10 K/W 0.02 -1 0 R,(K/W) 0.759 0.481 0.609 0.551 0.01 R1 , (s) 5.53*10-2 4.28*10-3 4.83*10-4 5.77*10-5 R2 single pulse 10 K/W 1s -2 C 1 = 1 / R 1 C 2 = 2 /R 2 10s 100s 1ms 10ms 100ms 1s tp, PULSE WIDTH Figure 27. Diode transient thermal impedance as a function of pulse width (D = tp / T) 10 Sep-02 SKP10N60A, SKB10N60A SKW10N60A TO-220AB symbol dimensions [mm] min max 10.30 15.95 0.86 3.89 3.00 6.80 14.00 4.75 0.65 1.32 min [inch] max 0.4055 0.6280 0.0339 0.1531 0.1181 0.2677 0.5512 0.1870 0.0256 0.0520 A B C D E F G H K L M N P T 9.70 14.88 0.65 3.55 2.60 6.00 13.00 4.35 0.38 0.95 0.3819 0.5858 0.0256 0.1398 0.1024 0.2362 0.5118 0.1713 0.0150 0.0374 2.54 typ. 4.30 1.17 2.30 4.50 1.40 2.72 0.1 typ. 0.1693 0.0461 0.0906 0.1772 0.0551 0.1071 TO-263AB (D2Pak) symbol dimensions [mm] min max 10.20 1.30 1.60 1.07 0.85 4.50 1.37 9.45 2.50 0.20 5.20 3.00 0.60 10.80 1.15 6.23 4.60 9.40 16.15 min [inch] max 0.4016 0.0512 0.0630 0.0421 0.0335 0.1772 0.0539 0.3720 0.0984 0.0079 0.2047 0.1181 0.0236 A B C D E F G H K L M N P Q R S T U V W X Y Z 9.80 0.70 1.00 1.03 0.65 4.30 1.17 9.05 2.30 0.00 4.20 2.40 0.40 0.3858 0.0276 0.0394 0.0406 0.0256 0.1693 0.0461 0.3563 0.0906 0.0000 0.1654 0.0945 0.0157 2.54 typ. 5.08 typ. 0.1 typ. 0.2 typ. 15 typ. 0.5906 typ. 8 max 8 max 0.4252 0.0453 0.2453 0.1811 0.3701 0.6358 11 Sep-02 SKP10N60A, SKB10N60A SKW10N60A TO-247AC symbol dimensions [mm] min max 5.28 2.51 2.29 1.32 2.06 3.18 min [inch] max 0.2079 0.0988 0.0902 0.0520 0.0811 0.1252 A B C D E F G H K L M N P 4.78 2.29 1.78 1.09 1.73 2.67 0.1882 0.0902 0.0701 0.0429 0.0681 0.1051 0.76 max 20.80 15.65 5.21 19.81 3.560 21.16 16.15 5.72 20.68 4.930 0.0299 max 0.8189 0.6161 0.2051 0.7799 0.1402 0.8331 0.6358 0.2252 0.8142 0.1941 3.61 6.12 6.22 0.1421 0.2409 0.2449 Q 12 Sep-02 SKP10N60A, SKB10N60A SKW10N60A i,v diF /dt tr r =tS +tF Qr r =QS +QF tr r IF tS QS tF 10% Ir r m t VR Ir r m QF dir r /dt 90% Ir r m Figure C. Definition of diodes switching characteristics 1 Tj (t) p(t) 2 r2 r1 n rn r1 r2 rn Figure A. Definition of switching times TC Figure D. Thermal equivalent circuit Figure B. Definition of switching losses Figure E. Dynamic test circuit Leakage inductance L =180nH an d Stray capacity C =55pF. Published by Infineon Technologies AG, 13 Sep-02 SKP10N60A, SKB10N60A SKW10N60A Bereich Kommunikation St.-Martin-Strasse 53, D-81541 Munchen (c) Infineon Technologies AG 2001 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 14 Sep-02 This datasheet has been download from: www..com Datasheets for electronics components. |
Price & Availability of SKB10N60A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |